User Contributed                                           MET/CAL PROCEDURE
=============================================================================
INSTRUMENT:            Wavetek:Model 75 S-1190 Sub 1
DATE:                  28-Apr-95
AUTHOR:                User Contributed
REVISION:              0
ADJUSTMENT THRESHOLD:  70%
NUMBER OF TESTS:       16
NUMBER OF LINES:       220
CONFIGURATION:         Datron 1281
=============================================================================
 STEP    FSC    RANGE NOMINAL        TOLERANCE     MOD1        MOD2  3  4 CON
  1.001  ASK-   R     N              P                            F        W
  1.002  ASK+                                          X
  1.003  HEAD         {}
  1.004  HEAD         {ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»}
  1.005  HEAD         {º Amplitude Test º}
  1.006  HEAD         {ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ}
  1.007  HEAD         {}ÍÍ Amplitude Test ÍÍ
  1.008  JMP          2.001
  1.009  EVAL   Dummy
  2.001  DISP         Set the UUT MENU as follows:
  2.001  DISP         SETUP .................................... press 3 times
  2.001  DISP         F2 ................................ (RSET)  press 1 time
  2.001  DISP         F3 .................................(EXEC)  press 1 time
  2.002  DISP         View the UUT display and verify display reads:
  2.002  DISP         RESET (Ver 2.2S)X
  2.003  DISP         Set the UUT MENU as follows:
  2.003  DISP         EDIT ..................................... press 2 times
  2.003  DISP         F1 ................................ (FUNC)  press 1 time
  2.004  DISP         Rotate the UUT CONTROL KNOB clockwise until display
  2.004  DISP         reads "FUNC SINE".
  2.005  DISP         Set the UUT MENU as follows:
  2.005  DISP         F3 ................................. (EXEC) press 1 time
  2.006  IEEE         [@1281]ACV AUTO,ACCP
  2.007  DISP         ÿ    Connect the UUT and the 1281 as follows:
  2.007  DISP         ÿ   [27][91]1m  MODEL 75        TO        1281
  2.007  DISP         ÿ       NOTE! USE A 50 ê FEEDTHROUGH
  2.007  DISP         ÿ                     ÚÄÄÄÄÄ¿ ÚÄ INPUT HI
  2.007  DISP         ÿ    ARB OUTPUT ÍÍÍÍÍͳ 50ê Æ͵
  2.007  DISP         ÿ                     ÀÄÄÄÄÄÙ ÀÄ INPUT LO
  2.008  IEEE         [@1281]RDG?[I]
  2.009  ACC    20    3.53V          130P% 10P/
  2.010  MATH         MEM=(MEM*2.828)
  2.011  MEMC         10.0V          1U            488.28H
  3.001  IEEE         [@1281]FREQ?[I]
  3.002  ACC    20    488.28H        130P% 5P/
  3.003  MEME
  3.004  MEMC         H              10U           10Vp-p
  4.001  HEAD         Amplitude Test
  4.002  DISP         ÿ    Connect the UUT and the 1281 as follows:
  4.002  DISP         ÿ   [27][91]1m  MODEL 75        TO        1281
  4.002  DISP         ÿ       NOTE! REMOVE 50 ê FEEDTHROUGH
  4.002  DISP         ÿ                             ÚÄ INPUT HI
  4.002  DISP         ÿ    ARB OUTPUT ÍÍÍÍÍÍÍÍÍÍÍÍÍ͵
  4.002  DISP         ÿ                             ÀÄ INPUT LO
  4.003  DISP         Set the UUT MENU as follows:
  4.003  DISP         PARAMATER ................................ press 2 times
  4.003  DISP         F1 ..................................(AMPL) press 1 time
  4.004  DISP         Rotate the UUT CONTROL KNOB CCW until display
  4.004  DISP         reads "AMP 25.00 mVp".
  4.005  DISP         Set the UUT MENU as follows:
  4.005  DISP         EDIT ..................................... press 4 times
  4.005  DISP         F2 ................................. (STOP) press 1 time
  4.005  DISP         Rotate CONTROL KNOB for a SP=0000 display.
  4.006  DISP         Set the UUT MENU as follows:
  4.006  DISP         EDIT ..................................... press 2 times
  4.006  DISP         F2 .............................. (ADJX,Y) press 2 times
  4.007  DISP         Adjust CONTROL KNOB for a UUT display of Y= 2047.
  4.008  IEEE         [@1281] DCV AUTO,FAST_ON
  4.009  IEEE         [@1281] RDG?[D2000][I]
  4.010  MATH         M[1] = MEM
  4.011  DISP         Adjust CONTROL KNOB for a UUT display of Y=-2047.
  4.012  IEEE         [@1281] RDG?[I]
  4.013  MATH         M[2] = MEM * -1
  4.014  MATH         MEM = M[2] + M[1]
  4.015  MEM*         1000
  4.016  ACC    200   50.00mV        14P% 0.5P/
  4.017  MEME
  4.018  MEMC         mVp-p          0.95U         25mVP
  5.001  DISP         Set the UUT MENU as follows:
  5.001  DISP         PARAMATER ................................ press 2 times
  5.001  DISP         F1 ..................................(AMPL) press 1 time
  5.002  DISP         Rotate the UUT CONTROL KNOB clockwise until display
  5.002  DISP         reads "AMP 250.0 mVp".
  5.003  DISP         Set the UUT MENU as follows:
  5.003  DISP         EDIT ...................................... press 1 time
  5.003  DISP         F2 .............................. (ADJX,Y) press 2 times
  5.004  DISP         Adjust CONTROL KNOB for a UUT display of Y= 2047.
  5.005  IEEE         [@1281] RDG?[I]
  5.006  MATH         M[1] = MEM
  5.007  DISP         Adjust CONTROL KNOB for a UUT display of Y=-2047.
  5.008  IEEE         [@1281] RDG?[I]
  5.009  MATH         MEM = MEM * -1
  5.010  MATH         MEM = MEM + M[1]
  5.011  MEM*         1000
  5.012  ACC    2     500.00mV       12P% 0.2P/
  5.013  MEME
  5.014  MEMC         mVp-p          9.5U          250mVP
  6.001  DISP         Set the UUT MENU as follows:
  6.001  DISP         PARAMATER ................................ press 2 times
  6.001  DISP         F1 ..................................(AMPL) press 1 time
  6.002  DISP         Rotate the UUT CONTROL KNOB clockwise until display
  6.002  DISP         reads "AMP 500.0 mVp".
  6.003  DISP         Set the UUT MENU as follows:
  6.003  DISP         EDIT ...................................... press 1 time
  6.003  DISP         F2 .............................. (ADJX,Y) press 2 times
  6.004  DISP         Adjust CONTROL KNOB for a UUT display of Y= 2047.
  6.005  IEEE         [@1281] RDG?[I]
  6.006  MATH         M[1] = MEM
  6.007  DISP         Adjust CONTROL KNOB for a UUT display of Y=-2047.
  6.008  IEEE         [@1281] DCV AUTO,FAST_ON
  6.009  IEEE         [@1281] RDG?[I]
  6.010  MATH         MEM = MEM * -1
  6.011  MATH         MEM = MEM + M[1]
  6.012  MEM*         1000
  6.013  ACC    2     1000.00mV      12P% 0.2P/
  6.014  MEME
  6.015  MEMC         mVp-p          23U           500mVP
  7.001  DISP         Set the UUT MENU as follows:
  7.001  DISP         PARAMATER ................................ press 2 times
  7.001  DISP         F1 ..................................(AMPL) press 1 time
  7.002  DISP         Rotate the UUT CONTROL KNOB clockwise until display
  7.002  DISP         reads "AMP 2.500 Vp".
  7.003  DISP         Set the UUT MENU as follows:
  7.003  DISP         EDIT ...................................... press 1 time
  7.003  DISP         F2 .............................. (ADJX,Y) press 2 times
  7.004  DISP         Adjust CONTROL KNOB for a UUT display of Y= 2047.
  7.005  IEEE         [@1281] RDG?[I]
  7.006  MATH         M[1] = MEM
  7.007  DISP         Adjust CONTROL KNOB for a UUT display of Y=-2047.
  7.008  IEEE         [@1281] RDG?[I]
  7.009  MATH         MEM = MEM * -1
  7.010  MATH         MEM = MEM + M[1]
  7.011  ACC    20    5.000V         12P% 0.1P/
  7.012  MEME
  7.013  MEMC         Vp-p           0.095U        2.5VP
  8.001  DISP         Set the UUT MENU as follows:
  8.001  DISP         PARAMATER ................................ press 2 times
  8.001  DISP         F1 ..................................(AMPL) press 1 time
  8.002  DISP         Rotate the UUT CONTROL KNOB clockwise until display
  8.002  DISP         reads "AMP 5.000 Vp".
  8.003  DISP         Set the UUT MENU as follows:
  8.003  DISP         EDIT ...................................... press 1 time
  8.003  DISP         F2 .............................. (ADJX,Y) press 2 times
  8.004  DISP         Adjust CONTROL KNOB for a UUT display of Y= 2047.
  8.005  IEEE         [@1281] RDG?[I]
  8.006  MATH         M[1] = MEM
  8.007  DISP         Adjust CONTROL KNOB for a UUT display of Y=-2047.
  8.008  IEEE         [@1281] RDG?[I]
  8.009  MATH         MEM = MEM * -1
  8.010  MATH         MEM = MEM + M[1]
  8.011  ACC    20    10.000V        12P% 0.1P/
  8.012  MEME
  8.013  MEMC         Vp-p           0.185U        5VP
  9.001  HEAD         {}
  9.002  HEAD         {ÉÍÍÍÍÍÍÍÍÍÍÍÍÍ»}
  9.003  HEAD         {º Offset Test º}
  9.004  HEAD         {ÈÍÍÍÍÍÍÍÍÍÍÍÍͼ}
  9.005  HEAD         {}ÍÍ Offset Test ÍÍ
  9.006  JMP          10.001
  9.007  EVAL   Dummy
 10.001  DISP         Set the UUT MENU as follows:
 10.001  DISP         SETUP .................................... press 3 times
 10.001  DISP         F2 ................................. (RSET) press 1 time
 10.001  DISP         F3 ................................. (EXEC) press 1 time
 10.002  DISP         View the UUT display and verify display reads:
 10.002  DISP         RESET (Ver 2.2S)X
#10.003  DISP         Set the UUT MENU as follows:
#10.003  DISP         EDIT ..................................... press 2 times
#10.003  DISP         F2 ................................ (ERASE) press 1 time
#10.003  DISP         F3 ................................. (EXEC) press 1 time
#10.004  IEEE         [@1281] RDG?[I]
#10.005  ACC    1     0.000V         6P% 0.2P/
#10.006  MEME
#10.007  MEMC         V              0.005U        Erase
 10.003  DISP         Set the UUT MENU as follows:
 10.003  DISP         PARAMATER ................................ press 2 times
 10.003  DISP         F1 ................................. (AMPL) press 1 time
 10.003  DISP         Rotate the UUT CONTROL KNOB clockwise until display
 10.003  DISP         reads "AMP 10.00 mVp".
 10.004  DISP         Set the UUT MENU as follows:
 10.004  DISP         F2 ................................(OFFSET) press 1 time
 10.005  DISP         Adjust CONTROL KNOB for a UUT display of 5.00V.
 10.006  IEEE         [@1281] RDG?[I]
 10.007  ACC    20    5.000V         6P% 0.1P/
 10.008  MEME
 10.009  MEMC         V              0.115U
 11.001  DISP         Adjust CONTROL KNOB for a display of 500 mV.
 11.002  IEEE         [@1281] RDG?[I]
 11.003  ACC    2     500mV          6P% 0.2P/
 11.004  MEM*         1000
 11.005  MEME
 11.006  MEMC         mV             25U
 12.001  DISP         Adjust CONTROL KNOB for a display of 45.0 mV.
 12.002  IEEE         [@1281] RDG?[I]
 12.003  ACC    200   45.0mV         7P% 0.5P/
 12.004  MEM*         1000
 12.005  MEME
 12.006  MEMC         mV             2.4U
 13.001  DISP         Adjust CONTROL KNOB for a display of -45.0 mV.
 13.002  IEEE         [@1281] RDG?[I]
 13.003  ACC    200   -45.0mV        7P% 0.5P/
 13.004  MEM*         1000
 13.005  MEME
 13.006  MEMC         mV             2.4U
 14.001  DISP         Adjust CONTROL KNOB for a display of -500 mV.
 14.002  IEEE         [@1281] RDG?[I]
 14.003  ACC    2     -500mV         6P% 0.2P/
 14.004  MEM*         1000
 14.005  MEME
 14.006  MEMC         mV             25U
 15.001  DISP         Adjust CONTROL KNOB for a display of -5.00 V.
 15.002  IEEE         [@1281] RDG?[I]
 15.003  ACC    20    -5.000V        6P% 0.1P/
 15.004  MEME
 15.005  MEMC         V              0.115U
 16.001  HEAD
 16.002  DISP         [27][91]1mDisconnect the test set-up.
 16.003  END